Contact

National

Stingl GmbH
Dimbacher Straße 25
74182 Obersulm-Willsbach

07134 / 13797-11

International

Stingl Systems GmbH
Dimbacher Strasse 25
D-74182 Obersulm-Willsbach

+49 7134 13797-11

News

04.07.2019
Trade fair Servparc 2019

The 2019 SERVPARC Facility Management trade show was very exciting for STINGL ...

by Stingl GmbH

Product catalog

Universal scaffolding shoe

Universal scaffolding shoe

Alternative to the plug-in scaffolding shoe, the universal scaffolding shoe also allows the safe and simple instalation of assembly platforms in lift, chimney and ventilation shafts, however, with different fixing methods and without the need of additional scaffolding sockets.

Universal scaffolding shoe
Universal scaffolding shoe

Material:
Base plate and u-shaped shoe made of St37-2 steel
(some versions with steel plate inlay)
primed

Measures: 190 x 180 x 6 mm
base plate with 4 drillings 13 mm
Weight: ca. 2,3 kg

Due to its moderate measures and weight, easy handling can be ensured. The universal scaffolding shoe complies with German DIN 4420-1 (12.1990) as well as DIN 175 norms and rules. It carries the GS -seal of approval No 02045.

The universal scaffolding shoe can be fixed to structural parts in various ways like with dowels or T-head bolts as well as by welding. Depending on the fixing scenarios it can carry point loads between 3 kN and 7 kN. It must not be charged with dynamic loads though.

In below-mentioned scenarios, the applicable force F was applied on the most unfavourable position.

Universal scaffolding shoe
Universal scaffolding shoe

In all subsequent mounting scenarios, the force F was set at the most unfavorable point:

Universal scaffolding shoe
Universal scaffolding shoe

In concrete C 20/25:
Dowel fixing
with 2 dowels HILTI HST M 12/20*
or equiv. with proof
(approval for concrete dowels HILTI HST Nr. Z-21.1-955)

Pressure zone max.: F=4,0 kN

Universal scaffolding shoe
Universal scaffolding shoe

In concrete C 20/25:
Dowel fixing
with 2 dowels HILTI HST M 12/10
or equiv.
with proof
(approval for concrete dowels HILTI HST Nr. Z-21.1-955)

Proven pressure zone max. F=7,0 kN.

Universal scaffolding shoe
Universal scaffolding shoe

In concrete C20/25:
fixing with 2 screws HILTI HUS-H 10x90
or equiv.
with proof

Proven pressure zone max. F=7,0 kN.

Universal scaffolding shoe
Universal scaffolding shoe

In concrete C 20/25:
Screw connection with anchor channel,
2 T-head screws M 12 x 40

Pressure zone max. F=4,0 kN

Only one-piece channels or short lengths with sizes ≥ 200 mm allowed. Min. channel profile e.g. HTA 40/22

Universal scaffolding shoe
Universal scaffolding shoe

Steel frame connection St37-2 with 2 machine screws M 12 x 40 (strength classification 5.6).

The bottom 60 mm of the shoe’s steel plate must lie near the wall or girder.

Construction personnel have to ensure that charges in the bottom pressure zone of the steel plate can be absorbed by the girder.

Universal scaffolding shoe
Universal scaffolding shoe

Steel frame connection St37-2 welded.
Bearing structural part must go flush with at least bottom part of steel plate.

Construction personnel have to ensure, that charges in the bottom pressure zone of the steel plate can be absorbed by the girder.

Universal scaffolding shoe
Universal scaffolding shoe

In the masonry shaft using chemical wall plugs. Installed in the masonry using 4 injection wall plugs.

The load-bearing capacity must in each case be calculated by a design planner. Use in the masonry is possible after verification, e.g. by means of tensile tests.

Product overview
Item No. Description Unit kN (max)
004200004001 Universal scaffolding shoe 190 x 180 x 6 mm 4,0
004200007001 Universal scaffolding shoe 190 x 180 x 6 mm 7,0

Universal stage shoe for brick shaft:
Stage shoes are mounted for example with 4 appropriate HILTI-injection anchor dowels.

The fixing with HILTI chemical dowels requires minimum (German) stone strength classes HLZ 12/II and KSL 12/II-1.2 or higher and better qualities (appropriate domestic classifications must be followed!). The assembly in junctures or gaps is also possible. Before setting the anchors, the mounting target has to be checked. If the stone strength is not defineable or of inferior quality a competent firm should be consulted to perform tests (4kN!).

Be aware that the waiting time depends on the temperature in the fixing ground and can vary from for example 30 minutes to more than 2 hours.

Manufacturer’s mounting instructions for chemical dowels must be followed carefully.

Installation instructions: For protection against side movement and tilt of the balk the safety strap must be used. The stage shoe must lie near the concrete. The bearing length of the balk on the stage shoe must be at least 80 mm. Balk widths of < 100 mm are not allowed.

Make sure that during mounting of the shoe all requirements by the fixing material manufacturer must be followed exactly, e.g. edge distances, installation depths etc. This includes also the transmission of forces within the structural part. It is assumed that fixing material for the stage shoe is not charged with any additional forces.

Copyright © 2019 Stingl GmbH
This website uses cookies to provide the best possible functionality.
By using this offer, you agree that we may leave cookies on your computer. More information...
OK