Stingl GmbH
Dimbacher Straße 25
74182 Obersulm-Willsbach

07134 / 13797-11


Stingl Systems GmbH
Dimbacher Strasse 25
D-74182 Obersulm-Willsbach

+49 7134 13797-11


Assembly-friendly shaft wall cladding

Article LIFTjournal edition 03/2020

Assembly-friendly shaft wall cladding 

Stingl has developed a product to meet the requirements of EN81-20 an assembly-friendly shaft wall cladding made of flame-resistant rigid foam panels. ... 

by Stingl GmbH

Product catalog

Three-part telescopic apron

Three-part telescopic apron

Vertical telescopic lift car apron for use in low shaft pits. In the case of shaft pits that are at least 400 mm deep, the required length of 750 mm can be produced by extending the telescopic apron.

The apron is not extended during normal operation and has a height of around 300 mm. The retracted apron sheets are held in place by a magnet. If released or if a power failure occurs, the apron sheets move to the required apron height automatically. The telescopic apron must then be put back in place manually by trained personnel. Thereafter, the system can be used again in normal operation. To ensure that the system functions correctly, the shaft door emergency release devices must be fitted with an additional door contact to be provided by the customer. These measures must be agreed with the responsible inspection authority.

According to DIN EN 81-20 paragraph 5.4.5

Door width intervals ranging from 750 mm up to 2800 mm.
Further dimensions available upon request.

Galvanised sheet steel 1,5 mm strength fixing material included

Height collapsed: 300 mm
Height expanded: 750 mm
Width: 700 mm to 1.300 mm

24 V supply voltage, 12 W service output, 24 W activating power
Monitoring with final position switches: 1 NC / 1 NO

Delivered in pre-assembled state, including fixing material.


  • High level of safety thanks to automatic deployment when the shaft door emergency release device is released in comparison with the manual solution
  • No impact noise when the lower halt board is hit, since it is not constantly extended
  • No mechanical wear
  • Simple manual resetting of extended apron
  • Position monitoring with contact switch
  • Several car aprons can be placed in line for greater door widths
Product overview
Item No. Description
Three-part telescopic apron for door widths...
2323070000 700 mm
2323080000 800 mm
2323090000 900 mm
2323100000 1.000 mm
2323110000 1.100 mm
2323120000 1.200 mm
2323130000 1.300 mm

Further dimensions available upon request

According to DIN EN 81-20 paragraph 5.4.5

Copyright © 2020 Stingl GmbH
This website uses cookies to provide the best possible functionality.
By using this offer, you agree that we may leave cookies on your computer. More information...