Contact

National

Stingl GmbH
Dimbacher Straße 25
74182 Obersulm-Willsbach

07134 / 13797-11

International

Stingl Systems GmbH
Dimbacher Strasse 25
D-74182 Obersulm-Willsbach

+49 7134 13797-11

News

04.07.2019
Trade fair Servparc 2019

The 2019 SERVPARC Facility Management trade show was very exciting for STINGL ...

by Stingl GmbH

Product catalog

Pit ladder type E/E1

Pit ladder type E/E1

Pit ladder type E
Pit ladder type E

Two-piece folding ladder made of aluminium with steel joints. Equipped with a mounting profile meant for placement in the sill groove to avoid tilt back. The profile can be easily adjusted according to the given pit depth. The bottom of the ladder is securely connected to a steel jack which is fixed to the shaft floor.

The folding ladder is especially suitable in lift shafts where fixing to the wall is impossible. Pit ladder type E requires a minimum shaft depth of 1.450 mm. The unfolded and locked ladder has a vertical height of approx. 2.200 mm. Exterior ladder width 350 mm.

Pit ladder type E
Pit ladder type E

The ladder complies with German DIN EN 131 + DIN EN 81-20/50 and VBG 74 standards set by the German Berufsgenossenschaft - Statutory Accident Insurance Institution. It comes complete with all necessary fixing material

The ladder is pulled up from the pit with a chain (ca. 3.000mm, to be connected with the shaft wall) and placed against the door threshold. Steel joints lock-in automatically while the mounting profile is placed in the sill groove.

After use, the ladder has to be lifted slightly and the joints have to be unlocked with a separate release rope before folding it back into the pit.

Product overview
Pit ladder type E
Item No. Description
Ladder length
L
2-part
foldable
Angle
α
DIN EN 81-20 Conformity
Pit depth
max. / smaller
HSG
0370225010 Pit ladder type E - 2,25 m 70° 1,01 m
  ● - true
○ - false
     

Further lengths available on request

Accessories
Item No. Description / Variant
304999001 Metal support with electrical switch
for pit ladders type E/E1
304999002 Wall mounted adapter
for pit ladder type E
303999006 Einhängeprofil Variante 1, starre Einhängetiefe 35 mm
303999007 Einhängeprofil Variante 2, für Drehtüren mit 2 Zapfen
303999008 Einhängeprofil Variante 3, platzsparend und abklappbar
303999009 Einhängeprofil Variante 4, flexible Einhängetiefe (zweiteilig) von 48–68 mm
Pit ladder type E/E1 - Dimensions
Pit ladder type E/E1 - Dimensions
DIN EN 81-20/50
Pit ladder type E1
Pit ladder
type E1

This 3-piece folding ladder is especially suitable for shaft pits which do not allow the fixing of a pitladder to the shaft wall or if floor fxing is required due to design reasons (e.g. panoramic lifts).

Thanks to its two pairs of hinges, type E1 is the ideal access ladder in shafts with low shaft depths and high pit depths.

Pit ladder type E1
Pit ladder
type E1

The pit ladder is equipped with an adjustable hook profile which has to be placed in the sill groove to avoid tilt back during use. If the ladder can be installed only parallel to the shaft door opening, an optional electrical switch should be used. The switch can be installed on the floor or at the shaft wall alternatively.

The ladder is pulled up from the pit with a chain and locks in automatically. After use, the type E1 is unlocked with a separate release rope before it can be folded back into the pit.

The floor-mounted jack ensures a safe ladder position at any time. It also functions as a guiding system when the ladder is brought from a folded position into an unfolded position. For hydraulic lifts the jack can be fixed to the shaft wall with an additional holder in order to avoid drill holes on the shaft floor which are generally not allowed.

The ladder comes with fixing material. Besides the electrical switch and the jack holder for hydraulic lifts it can also be equipped optionally with a handrail extension.

The pit ladder type E1 complies to DIN EN 131 + DIN EN 81-20/50.

The pit ladder type E1 is available in two lengths:

Version 1

Vertical length fold out: 2.460 mm
Pack size (L x W x H): 1.020 x 460 x 250 mm

Version 2

Vertical length fold out: 3.400 mm
Pack size (L x W x H): 1.300 x 460 x 250 mm

Installation example:
Parallel to the door threshold

Pit ladder type E1 - Parallel to the door threshold
Parallel to the door threshold

Installation example:
longitudinal

Schachtgrubenleiter Type E1 - Longitudinal installation
Longitudinal installation
Product overview
Pit ladder, type E1 - angle α = 70°)
Item No. Description
Ladder length
L
Steps DIN EN 81-20 Conformity
Pit depth
max. / smaller
HSG
0370175020 Pit ladder, type E1
1,75 m
3x2 0,54 m
0370246020 Pit ladder, type E1
2,46 m
3x3 1,21 m
0370340020 Pit ladder, type E1
3,40 m
3x4 2,09 m

Further lengths available on request

Accessories
Item No. Description / Variant
304999001 Metal support with electrical switch for pit ladders type E/E1
304999002 Wall mounted adapter for pit ladder type E
303999006 Einhängeprofil Variante 1, starre Einhängetiefe 40 mm
303999007 Einhängeprofil Variante 2, für Drehtüren mit 2 Zapfen
303999008 Einhängeprofil Variante 3, platzsparend und abklappbar
303999009 Einhängeprofil Variante 4, flexible Einhängetiefe (zweiteilig) von 48–68 mm
Pit ladder type E/E1 - Dimensions
Pit ladder type E/E1 - Dimensions
Copyright © 2019 Stingl GmbH
This website uses cookies to provide the best possible functionality.
By using this offer, you agree that we may leave cookies on your computer. More information...
OK