Counterweight protection for attachment to the wall
he basic kit consists of 8 galvanised steel panels (perforated) including fixing material. The covered area has a width up to 1.240 mm and a depth up to 300 mm. Additional panels can increase the width up to 1.600 m and the depth up to 450 mm.
Additional plates can increase the width up to 1.600 mm and the depth up to 450 mm.
Material: Galvanised perforated steel plates (mesh width 8 x 8 mm)
Plate thickness: 1,5 mm
Delivery: c-profile channels, brackets and fixing material included
According to DIN EN 81-20 paragraph 184.108.40.206.1, the mounting has to be done with a distance of max. 300 mm between shaft floor and the lower edge of the counterweight protection.
|231999002||Counterweight protection, width up to 1.240 mm, depth up to 300 mm|
|23402220001||Extension panel, 2.200 x 310 x 1,5 mm|
|23402220002||Extension panel, 2.200 x 150 x 1,5 mm|
Counterweight protection for attachment to guide rails
The counter-weight protection consists of two bevelled steel panels, horizontal telescopic up to a max. width of 1.250 mm. The cover is fixed to the guide rail with clips. According to DIN EN 81-20 paragraph 220.127.116.11.1, the mounting has to be done with a distance of max. 300 mm between shaft floor and the lower edge of the counterweight protection.
Steel plates made of galvanised steel 1,5 mm
Width of the single element: 1.000 mm
Delivery with fixing material
Individual dimensions and solutions upon request
- Prevention of accidents in the counterweight danger area
- Flexible use because of variable width
- Simple installation thanks to few parts
According to EN 81-20 par. 18.104.22.168.1 the distance between the shaft floor and the lower edge of the counterweight protection must be 300 mm.
|231999003||Counterweight protection, 4 single elements 750 x 1.140 mm|